Authorized Applicator
Installed with materials we're certified to apply.
Certifications available on request.
We grind, polish, stain, and seal concrete floors for warehouses, showrooms, and industrial spaces across Indiana — one slab at a time.
Multi-step mechanical grinding brings the aggregate to the surface and builds a glass-like sheen with no coatings to wear off.
Acid and water-based stains react with the slab itself, giving showrooms and retail floors depth and color that won't chip.
Penetrating densifiers and topical sealers lock out dust, oil, and moisture — built for forklift traffic, not foot traffic.
Polished concrete is a multi-step process: a concrete floor is mechanically ground, honed, and polished with bonded abrasives to expose the slab's true surface. A chemical hardener penetrates the concrete along the way, dust-proofing it from the inside out.
The result: a smooth, reflective floor with none of the coatings or waxes that flooring usually depends on. Our crews follow the same grinding sequence used by our resurfacing partner, Northwest Floor, adapted for the concrete we work with across Indiana.
We inspect the concrete for cracks, spalling, and old coatings, then patch and strip anything that would keep abrasives from biting evenly.
Site walk · crack repair · coating removalMetal-bond diamond tooling opens the surface and levels it flat, cutting down until the aggregate we want exposed starts to show.
16–30 grit metal bondA chemical hardener is spread across the ground surface and left to penetrate, reacting with the concrete to close its pores from the inside.
Lithium densifier · 30–60 min cureWe step up through progressively finer resin-bond diamonds, removing scratch patterns left by the previous grit each time.
50 → 100 → 200 grit resin bondFinal passes with 400–3000 grit pads burnish the slab up to the sheen level you've specified — satin, semi-gloss, or high-gloss.
Burnished, no topical waxA guard or stain-resistant sealer goes down last, then the floor gets a final buff so it's ready for foot and forklift traffic the same day.
Stain guard · final burnishA damp mop handles daily upkeep. No waxing, no reapplying coatings, no scheduled downtime for refinishing.
Polishing the slab you already have costs less than replacing it, and the low upkeep pays off for years after install.
No new flooring material to manufacture or landfill. The reflective surface also cuts down on artificial lighting needs.
Every slab reads a little differently once it's ground. Here's what you're actually choosing when you spec a polished floor.
Stains and dyes can shift a floor's tone across a wide range without hiding the concrete underneath.
Grinding depth controls how much stone and gravel shows through — from a fine cream finish to full aggregate.
Finishes range from a low matte sheen to a high-gloss polish, depending on traffic and light in the space.
Saw-cut scoring, stencils, and engraving can lay borders, logos, or bands directly into the floor.